Reflashing your 2006-2011 4G Eclipse GT/GS/Spyder ECU

• Reflashable Read/Write by using MMCFlash "Module2-Mitsubishi"
• Other vehicles also using this method are
- 2003 Mitsubishi Galant 5 x 5 series.
- 2009 Mitsubishi Triton.
• In MMCFlash select "MH8302F [512K] k-Line"
or in MMCflash select "MH8304F [768k]" if you have this type of microcontroller in your ecu.

http://club4g.org/board/tuning-electronics/26146-evoscan-mmcflash-reflash-software-discussion-testing-post694470.html#post694470

Wiring the openport 2.0 cable directly to the ECU for use with MMCFlash

Read ROM:
step1. plug in openport 2.0 cable.
step2. plug in mmcflash usb dongle
step3. select "MH8302F[512K]"
step4. press Read

Flash ROM:
step1. plug in openport 2.0 cable.
step2. plug in mmcflash usb dongle
step3. select "MH8302F[512K]"
step4. open rom file.
step5. press checksum if button is not greyed (this edits the checksum in memory only, not the file on disk)
step6. press Write, to update the Vehicle ECU (Ensure full battery, or on a battery charger) k-line reflash is recoverable (restartable) anyway after bricked.

Anybody can edit the Eclipse 4G roms for free.. just grab a copy of ECUFLASH from
http://www.evoscan.com/free-ecu-rom-downloads


Also grab the new opensource Eclipse ECU ROM table XML definitions for free from:
www.evoscan.com/roms/mitsubishi

You can edit Rev Limiter,  Speed Limiter, Stationary Rev Limiter.. etc.

And you too can edit/tune the tables for free for Eclipse4G like the screenshot posted here.

Got an EcuFlash XML file for this? Please post it here:

Current folder: roms  eclipse4gxml

help

File name

Size

Last changed